Listening To Fm Radio; Auto Tuning; Manual Tuning; Manual Presetting - Sherwood R-807 Operating Instructions Manual

Listening to FM Radio

Auto Tuning

1
Press TUNE + or TUNE - for more than
2 seconds.
• The tuner keeps searching until a station with
strong signal strength is found. The display
shows the tuned frequency.
• If the found station is not the desired one,
simply repeat this operation.
• Stations with weak signal strength are
skipped during auto tuning.

manual Tuning

1
Press TUNE + or TUNE - repeatedly until the
desired station is found.
Operating Your System

manual Presetting

1
Tune to the desired station with auto or manual
tuning.
2
Press ENTER/MEMO.
• A preset number blinks.
3
Select a desired preset number (1~30) by
pressing TUNE + or TUNE -.
• A station has now been stored in the memory.
• A stored station is erased from the memory
by storing another station in its place.
4
Press ENTER/MEMO again to confirm your
selection.
• The station has now been stored in the
memory.
• A stored station is erased from the memory
by storing another station in its place.
5
Repeat the above steps 1 - 4 to store another
station.
39