Getting Started - Teac CX-400iDAB Owner's Manual

The CX-400iDAB comes mounted with an adapter for iPod with
color display (40GB, 60GB), "60GB (color) + Photo 40GB/60GB".
To play your iPod through the CX-400iDAB, you have first to
check if the factory mounted adapter fits your model of iPod. If it
does not, you have to replace it with a correct one, as explained
below.
1. Remove the adapter from the Dock of the CX-400iDAB.
Hold the left and right sides of the adapter and gently pull it
up.
2. Choose the Dock adapter that fits your iPod mobile
digital device.
"nano" for iPod nano.
"20GB + U2" for 20 GB iPods with Click Wheels, U2 Special
Edition iPods, 30 GB iPods with video and 80 GB iPod Classic
models.
"60GB (color) + Photo 40GB/60GB" for 40 GB iPods with
Click Wheels, iPods with color displays, 60 GB iPods with
video and 160 GB iPod Classic models.
Use the adapter supplied with the iPod or a commercially
available one to use other iPod types.
3. Insert the adapter into the Dock of the CX-400iDAB.
Fit the front edge of the adapter into the Dock, and then
press the back edge of the adapter onto the Dock until
a slight "click" is heard indicating the adapter is inserted
correctly.
When you need to remove the adapter, hold the left and right
sides of the adapter and gently pull it up.
10

Getting started

1
2
Compatible iPod Software
In case your iPod will not work with the CX-400iDAB or with the
remote control unit, software update may solve the problem.
Visit the Apple website and download the latest iPod Software.
http://www.apple.com/ipod/download/