CDA DV 980 Series Installation And Use Manual page 21

Replacing the Halogen Oven Lights
WARNING: Ensure the appliance is switched off before replacing the lamp to avoid
the possibility of electric shock.
– Let the oven cavity and the heating elements to cool down;
– Switch off the electrical supply;
– Remove the protective cover C (fig. 7);
– Replace the halogen lamp B with a new one suitable for high temperatures having the
following specifications: 230V and same power (check watt power as stamped in the lamp
itself) of the replaced lamp.
IMPORTANT WARNING: Never replace the bulb with bare hands; contamination
from your fingers can cause premature failure.
Always use a clean cloth or gloves.
– Refit the protective cover;
Note: Oven bulb replacement is not covered by your guarantee.
Fig. 7
WRONG
CORRECT
C
B
21