CDA DV 980 Series Installation And Use Manual page 22

Assembling and Dismantling of the Side Runner Frames
– Assemble the wire racks to the oven walls using the 2 screws (Figs. 8-10).
– Slide into the guides, the shelf and the tray (Figs. 9-11). The rack must be fitted so that the safety notch, which
stops it sliding out, faces the inside of the oven; the guard rail shall be at the back.
– To dismantle, operate in reverse order.
Guard rail
Guard rail
Stop notch Stop notch
Fig. 8
Fig. 9
Guard rail Guard rail
Stop notch Stop noch
Fig. 10 Fig. 11
22