Quick Reference Guide
Powering the VC5090 On/Off
The Main Power switch provides power to the VC5090. Only use this
switch when removing power completely from the device. Everything
stored in RAM is lost.
Main Power Switch
Use the Power button on the Quick Access Panel to place the VC5090
into Suspend mode or wake the VC5090 from Suspend mode.
Charging the Internal Backup Battery
After installing the VC5090, leave it powered on for 24 hours to fully
charge the internal backup battery. Note that the VC5090 can charge the
backup battery while in Suspend mode, but not if power is removed.
USB/Keyboard
Connector
21
Power Button