Motorola VC5090 Quick Reference Manual page 16

16
• DO NOT wind a cable in and out of the mesh on a cage.
• On electric vehicles, take the power from as close to the battery as
possible, but not directly from the battery terminals, and not before
any main fuse.
• On gasoline, diesel or propane vehicles, take the power from as close
to the battery terminals as possible, and avoid using existing wiring.
• Ensure that all fuses are as close as possible to the power source.
12-24 Volt Gasoline, Diesel, or Propane Forklifts
• All power wiring must use the supplied power cable.
• Fuses:
two 3AG, 20A, 250V, SLO BLO fuses
-
one 3AG, 1A, 250V, SLO BLO fuse.
-
• Keep the path between the battery and the vehicle computer as short
as possible, and away from any part of the ignition high tension
system.
Ignition Switch
Vehicle
Battery
Electric Forklifts 24 to 60 Volts
• All power wiring must use the supplied power cable.
• Fuses:
two 3AG, 20A, 250V, SLO BLO fuses
-
one 3AG, 1A, 250V, SLO BLO fuse.
-
1A Fuse
Yellow
Red
20A Fuse
Black
20A Fuse
Green
VC5090 Vehicle Computer
Power Cable
25-71919-01
VC5090