Advertisement
PERLICK RESIDENTIAL INSTALLATION MANUAL FOR BEER DISPENSING EQUIPMENT
TABLE OF CONTENTS
Dispensing Equipment Installation .....................................3
Connecting the CO2 Cylinder ................................................8
CO2 Leak Test ....................................................................................8
Mounting Hole Template ..........................................................9
CONGRATULATIONS
Congratulations on your purchase of a Perlick high
quality residential Beer Dispenser. Perlick has proudly
manufactured beer dispensing systems for over 50 years
for bars, restaurants, stadiums, arenas and large venues
around the world. That same technology is used in each
and every residential beer dispenser we produce, assuring
you'll pour fresh, cold beer as the brewery intended it to
be enjoyed.
All Perlick products are built with commercial grade
stainless steel, providing you with the beauty and durability
for a lifetime of use. This installation guide will show you
how to properly install the dispensing equipment on your
Perlick Beer Dispenser.
We dedicate considerable time to ensure that our products
provide the highest level of customer satisfaction. If,
however, service is required, call Perlick at 800.558.5592.
For your own protection, never return merchandise for
credit without our approval.
We thank you again for selecting a high quality Perlick Beer
Dispenser. Cheers!
C
US
2
perlick.com
IMPORTANT!
The installation of the actual beer
dispenser cabinet should happen prior
to installing the dispensing equipment.
Refer to the Installation Manual that
accompanied the Beer Dispenser for step-
by-step installation of the cabinet.
Keep CO2 cylinder away from
DANGER
heat. Rupture disc vents at 122°F
maximum.
Do not drop or throw regulator or
DANGER
CO2 cylinder.
Allow only properly trained and
WARNING
experienced personnel to handle
high pressure gas.
Do not apply oil to the regulator!
WARNING
Advertisement
