Customizing The Equalizer Curve -Eq3; Adjusting Setup Items - Set - Sony CDX-GT62/PW Operating Instructions Manual

•
Customizing the equalizer curve
-EQ3
"CUSTOM" of EQ3 allows you to make your
own equalizer settings.
1
Select a source, then press the select
button repeatedly to select "EQ3:'
2
Rotate the control dial to select
"CUSTOM."
3
Press the select button repeatedly
until "LOW;' "MID" or "HI" appears.
4
Rotate the control dial to adjust the
selected item.
The volume level is adjustable in 1 dB steps,
from -10 dB to +10 dB.
, n,.
L U ""
+ 6d]
Repeat steps 3 and 4 to adjust the equalizer
curve.
To restore the factory-set equalizer curve,
press and hold the select button before the
setting is complete.
After 3 seconds, the setting is complete and
the display returns to normal play/reception
mode.
Tip
Other equalizer types are also adjustable.
Adjusting setup items - SET
1
Press and hold the select button.
The setup display appears.
2
Press the select button repeatedly
until the desired item appears.
3
Rotate the control dial to select the
setting (example "ON" or "OFF").
4
Press and hold the select button.
The setup is complete and the display returns
to normal play/reception mode.
Note
Displayed items will differ, depending on the source
and setting.
The following items can be set (follow the page
reference for details):
"e" indicates the default settings.
CLOCK-ADJ (Clock Adjust) (page 4)
BEEP
To set "BEEP-ON" (e) or "BEEP-OFF."
AUX-A*1 (AUX Audio)
To tum the AUX source display "AUX-A-ON"
(e) or "AUX-A-OFF" (page 13).
A.OFF (Auto Off)
To shut off automatically after a desired time
when the unit is turned off.
- "AOFF-NO" (e), "A.OFF-30S (Seconds),"
"AOFF-30M (Minutes)" or "AOFF-60M
(Minutes)."
SUB/REAR*1
To switch the audio output.
- "SUB-OUT" (e): to output to a subwoofer.
- "REAR-OUT": to output to a power amplifier.
DEMO (Demonstration)
To set "DEMO-ON" (e) or "DEMO-OFF."
DIMMER
To change the brightness of the display.
- "DIMMER-AT" (e): to dim the display
automatically when you tum lights on.
- "DIMMER-OFF': to deactivate the dimmer.
- "DIMMER-ON": to dim the display.
CONTRAST
To adjust the contrast of the display. The
contrast level is adjustable in 7 steps.
ILLUMI (Illumination)
To change the illumination color: "ILLUMI-I"
(e) or "ILLUMI-2."
12