Page 1
To switch the FM/AM tuning step, see page 4. To cancel the demonstration (DEMO) display, see page 4. Para cambiar el paso de sintonización de FM/AM, consulta la página 4. Para cancelar la pantalla de demostración (DEMO), consulte la página 4. CDX-GT626UI/CDX-GT620UI/CDX-GT62UMI...
Page 2
Optical Pick-up Block with 7 mm aperture.) ZAPPIN and Quick-BrowZer are trademarks of Sony Corporation. Windows Media is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries.
Rotate the control dial until “DEMO” appears, then press it. Getting Started Rotate the control dial to select “DEMO-OFF,” then press it. Switching the FM/AM The setting is complete. tuning step Press (BACK) twice. The display returns to normal reception/ The FM/AM tuning step is factory-set to the play mode.
Detaching the front panel You can detach the front panel of this unit to prevent theft. Press and hold . The unit is turned off. Press the front panel release button , then remove the panel by pulling it towards you.
Location of controls Main unit ZAP button page 17 This section contains instructions on the location of controls and basic operations. To enter ZAPPIN™ mode. SOURCE/OFF button* Control dial/ENTER/MENU/APP Press to turn on the power; select the button page 14, 20 source (Radio/CD/USB/AUX).
Page 7
(BACK)/MODE button page 9, 13 Note Press to return to the previous display; If the unit is turned off and the display select the radio band (FM/AM). disappears, the unit cannot be operated with the Press and hold to enter/cancel the remote commander unless ...
RM-X211 Remote (BACK) button To return to the previous display. commander ENTER button To apply a setting. PTY (Program Type) button VOL (Volume) +* /– button ATT (Attenuate) button To attenuate the sound. To cancel, press again.
Storing manually Radio While receiving the station that you want to store, press and hold a number button ( to ) until “MEM” Storing and receiving appears. stations Tuning step setting is required (page 4). Receiving the stored stations Notes Select the band, then press a number button (...
Page 10
Selecting PTY (Program Types) Setting CT (Clock Time) Use PTY to display or search for a desired The CT data from the RDS transmission program type. sets the clock. Press during FM reception. Set “CT-ON” in setup (page 20). The current program type name appears if the station is transmitting PTY data.
USB devices • MSC (Mass Storage Class)-type USB Playing a disc devices compliant with the USB standard can be used. This unit can play CD-DA (also containing • Backup of data to a USB device is CD TEXT) and CD-R/CD-RW (MP3/ recommended.
To remove the USB device, stop the USB playback, then remove the USB device. iPod Notes • Do not use USB devices so large or heavy that In these Operating Instructions, “iPod” is they may fall down due to vibration, or cause a used as a general reference for the iPod loose connection.
Caution for iPhone Operating an iPod directly When you connect iPhone via USB, phone call — Passenger control volume is controlled by iPhone, not the unit. Do not inadvertently increase the volume on the unit during a call, as sudden loud sound may result You can operate an iPod directly even when when the call ends.
Press and hold (APP) on the unit for more than 2 seconds. App Remote Connection to iPhone starts. When connection is established, the Downloading the “App Remote” name of application on iPhone appears application from App Store is required for when selecting a source, and some iPhone.
Shuffle play Select To play Searching and SHUF ALBUM album in random playing tracks order. SHUF DISC* disc in random order. Playing tracks in various SHUF PODCAST* podcast in random modes order. You can listen to tracks repeatedly (repeat SHUF ARTIST* artist in random order.
Press . Searching a track by The display returns to the Quick- name — Quick-BrowZer™ BrowZer mode and the selected item appears. You can search for a track in a CD or USB Rotate the control dial to select the device easily by category.
Searching a track by listening Sound Settings and to track passages — ZAPPIN™ Setup Menu By playing back short track passages in a CD or USB device in sequence, you can Enjoying sophisticated sound search for a track you want to listen to. functions —...
Page 18
Customizing the equalizer Optimizing sound by Time curve — EQ7 Setting Alignment — Listening Position “CUSTOM” of EQ7 allows you to make your own equalizer settings. The unit can simulate a natural sound field by delaying the sound output from each After selecting a source, press , speaker to suit your position.
Page 19
Rotate the control dial to select the subwoofer position from “NEAR,” The DM+ setting can be memorized for each “NORMAL” or “FAR,” then press it. source other than the tuner. Press (BACK) to return to the previous display. Using rear speakers as To cancel listening position, select “OFF”...
Rotate the control dial until “SW AUTO OFF DIREC” appears, then press it. Shuts off automatically after a desired time when the unit is turned off: “NO,” Rotate the control dial until “SW “30S (Seconds),” “30M (Minutes),” “60M MODE” appears, then press it. (Minutes).”...
Page 21
BALANCE S.WOOFER* (Subwoofer) Adjusts the sound balance: “RIGHT-15” SW LEVEL (Subwoofer Level) – “CENTER” – “LEFT-15.” Adjusts the subwoofer volume level: “+10 dB” – “0 dB” – “–10 dB.” FADER (“ATT” is displayed at the lowest Adjusts the relative level: “FRONT-15” – setting.) “CENTER”...
DISPLAY: Using optional DEMO (Demonstration) Activates the demonstration: “ON,” equipment “OFF.” BLK OUT (Black Out) Auxiliary audio Turns off the illumination automatically equipment for any source (e.g., during radio reception/CD playback, etc.) if no By connecting an optional portable audio operation is performed for 5 seconds: device to the AUX input jack (stereo mini “ON,”...
• Discs that this unit CANNOT play – Discs with labels, stickers, or sticky tape or Additional paper attached. Doing so may cause a malfunction, or may ruin the disc. Information – Discs with non-standard shapes (e.g., heart, square, star). Attempting to do so may damage the unit.
Maximum power output: 52 W × 4 (at 4 ohms) Notes • For safety, turn off the ignition before cleaning General the connectors, and remove the key from the Outputs: ignition switch. Audio outputs terminal (front, rear/sub • Never touch the connectors directly with your switchable) fingers or with any metal device.
Page 26
If the unit is turned off and the display – Turn off the unit. disappears, the unit cannot be operated with The display disappears while the unit is the remote commander. operating. – Turn on the unit. The Black Out function is set to on (page 22). The power antenna (aerial) does not extend.
Page 27
The disc has been forcibly inserted upside Application name is mismatched with the down or in the wrong way. actual application in App Remote. Launch the application again from the “App The disc does not play back. Remote” application. ...
Page 28
OVERLOAD If these solutions do not help improve the USB device is overloaded. situation, consult your nearest Sony dealer. – Disconnect the USB device, then change the source by pressing . If you take the unit to be repaired because of CD playback trouble, bring the disc that was –...
Page 30
Bloque óptico con una abertura de 7 mm). ZAPPIN y Quick-BrowZer son marcas comerciales de Sony Corporation. Windows Media es una marca comercial registrada o una marca comercial de Microsoft Corporation en los EE. UU. y otros países.
Page 31
Tabla de contenidos Procedimientos iniciales ..........4 Cambio del paso de sintonización de FM/AM.
Cancelación del modo Procedimientos DEMO iniciales Puede cancelar la pantalla de demostración que aparece mientras la unidad está Cambio del paso de apagada. sintonización de FM/AM Presione y gire el selector de control hasta que aparezca El paso de sintonización de FM/AM está “DISPLAY”, luego presiónelo.
Extracción del panel Colocación del panel frontal frontal Fije la parte del panel frontal en la parte de la unidad, tal como muestra la Es posible extraer el panel frontal de la ilustración y presione el lado izquierdo unidad para evitar que la roben.
Ubicación de los controles Unidad principal Este apartado contiene instrucciones acerca CD/USB: de la ubicación de los controles y las Para saltear una pista (presionar); para operaciones básicas. saltear pistas en forma continua (presionar y volver a presionar al cabo ...
Page 35
Ranura del disco App Remote* : PAUSE Inserte el disco (con la etiqueta mirando Para pausar la reproducción. hacia arriba) y se iniciará la Presiónelo nuevamente para reproducción. reanudar la reproducción. Visualizador Botón DSPL (pantalla)/SCRL Botón (Expulsar) (desplazamiento) página 10, 11, 12, Para expulsar el disco.
Botón Control remoto RM-X211 (BACK) Para volver a la pantalla anterior. Botón ENTER Para aplicar un ajuste. Botón PTY (tipos de programa) Botón VOL (Volumen) +* /– Botón ATT (Atenuar) Para atenuar el sonido. Para cancelar esta función, vuelva a presionarlo.
Sugerencia También puede presionar , girar Radio el control para seleccionar “TUNER” y luego presionarlo para seleccionar la fuente. Almacenamiento y recepción de emisoras Almacenamiento manual Se debe ajustar el paso de sintonización Mientras recibe la emisora que desea (página 4). almacenar, mantenga presionado un botón numérico (de ...
Tipos de programas NEWS (Noticias), AFFAIRS (Temas de Las emisoras de radio FM que tienen el actualidad), INFO (Información), SPORT servicio de Sistema de datos de radio (RDS) (Deportes), EDUCATE (Educación), envían información digital inaudible junto a DRAMA (Drama), CULTURE (Cultura), la señal habitual del programa de radio.
Dispositivos USB • Es posible utilizar dispositivos USB de Reproducción de un disco almacenamiento masivo (MSC) que cumplan con el estándar USB. Esta unidad permite reproducir discos CD- • Se recomienda realizar una copia de DA (incluidos CD TEXT) y CD-R/CD-RW seguridad de los datos almacenados en los (archivos MP3/WMA/AAC (página 25)).
• Durante la reproducción de un archivo MP3/ Reproducción de un WMA/AAC de VBR (Velocidad de bits dispositivo USB variable) o al avanzar o retroceder rápidamente, es posible que el tiempo de reproducción transcurrido no se muestre con precisión. Abra la cubierta USB y conecte el •...
Para detener la reproducción, mantenga presionado durante 1 iPod segundo. Para retirar el iPod, detenga la reproducción En este Manual de instrucciones, “iPod” se del iPod y, a continuación, retire el iPod. utiliza como referencia general para las funciones del iPod en el iPod y el iPhone, a Precaución para iPhone Al conectar el iPhone mediante USB, el volumen menos que se especifique lo contrario en el...
Saltear álbumes, podcasts, géneros, listas de App Remote reproducción y artistas Para iPhone es necesario descargar la Para Realice esta acción aplicación “App Remote” desde App Store Presione / (ALBUM Saltear Si se descarga la aplicación a iPhone y se /) [presionar una vez conecta a la unidad, tendrá...
Mantenga presionado (APP) en la unidad por más de 2 segundos. Búsqueda y Comienza la conexión con iPhone. Al establecerse la conexión, el nombre de reproducción de pistas la aplicación del iPhone aparece cuando se selecciona la fuente y algunas de las Reproducción de pistas funciones de reproducción de la en varios modos...
Reproducción aleatoria Búsqueda de una pista Seleccione Para reproducir por nombre — Quick- SHUF ALBUM álbumes en orden BrowZer™ aleatorio. SHUF DISC* discos en orden Puede buscar una pista fácilmente en un CD aleatorio. o dispositivo USB por categoría. SHUF PODCAST* podcast en orden Presione (BROWSE)*.
Presione + en el modo Quick- Gire el selector de control para BrowZer. seleccionar el elemento deseado y, a continuación, presiónelo. Aparecerá el nombre del elemento. Si el elemento seleccionado es una pista, Gire el selector de control para empieza la reproducción.
Presione o cuando se reproduzca una pista que desea Ajustes de sonido y escuchar. La pista seleccionada se reproduce menú de configuración normalmente desde el principio. Al presionar (BACK) también se Uso de funciones de reproducirá nuevamente la pista sonido sofisticadas seleccionada.
Page 47
Presione (BACK) para volver a la Personalización de la curva pantalla anterior. de ecualizador — Ajuste de La curva de ecualizador se almacena en “CUSTOM”. “CUSTOM” de EQ7 le permite realizar sus propios ajustes en el ecualizador. Optimización de sonido por Después de seleccionar una fuente, Alineación de tiempo presione , gire el selector de...
Page 48
Gire el selector de control hasta que Gire el selector de control para ajustar aparezca “POSITION” y, a la posición de escucha y, a continuación, presiónelo. continuación, presiónelo. Rango ajustable: “+3” – “CENTER” – Gire el selector de control hasta que “–3”.
Nota Uso de los altavoces Asegúrese de conectar un altavoz potenciador de posteriores como altavoz graves de 4 a 8 Ω a cualquiera de los cables del potenciador de graves altavoz posterior. No conecte un altavoz al otro cable de altavoz posterior. —...
Page 50
Presione (BACK) para volver a la ZAPPIN* pantalla anterior. ZAP TIME (Tiempo de reproducción * No es necesario realizar el paso 4 para los del modo Zappin) ajustes de CLOCK-ADJ, TUNER-STP y BTM. Permite seleccionar el tiempo de reproducción de la función ZAPPIN. Los siguientes elementos pueden ajustarse –...
Page 51
ALO (Optimizador de nivel automático) S.WOOFER* (Altavoz potenciador de Ajuste el nivel de volumen de graves) reproducción de todas las fuentes de SW LEVEL (Nivel del altavoz reproducción al nivel óptimo: “ON”, potenciador de graves) “OFF”. Permite ajustar el nivel de volumen del altavoz potenciador de graves: “+10 dB”...
*2 Cuando la salida de audio se ajusta en “SUB- OUT” (página 22). Uso de equipo *3 No aparece cuando está seleccionado el sintonizador. opcional *4 Cuando la salida de audio se ajusta en “REAR- OUT” y “SW DIREC” se ajusta en “OFF”. Equipo de audio auxiliar *5 Cuando la salida de audio se ajusta en “REAR- OUT”...
• Esta unidad se diseñó para reproducir discos que cumplen con el estándar Compact disc. Información (CD). Los DualDisc y otros discos de música codificados con tecnologías de protección de complementaria derechos de autor no cumplen el estándar Compact disc. (CD), por lo que no podrán Precauciones reproducirse con esta unidad.
Si desea realizar alguna consulta o solucionar algún problema relativo a la unidad que no se trate en este manual, póngase en contacto con el distribuidor Sony más cercano. Acerca de iPod • Puede conectarse a los siguientes modelos de iPod. Actualice sus Mantenimiento dispositivos iPod a la última versión de...
Especificaciones ADVERTENCIA La pila puede explotar si no se emplea Sección del sintonizador adecuadamente. No recargue la pila; tampoco la desmonte ni la arroje al fuego. Rango de sintonización: 87,5 – 108,0 MHz (a intervalos de 50 kHz) Limpieza de los conectores 87,5 –...
Antena de alimentación/Terminal de control La antena de alimentación no se extiende. del amplificador de potencia (REM OUT) La antena de alimentación no dispone de una Entradas: caja de relé. Terminal de entrada del control remoto Terminal de entrada de la antena Toma de entrada AUX (minitoma estéreo) No se emite el sonido.
Page 57
La función Auto Off no funciona. La unidad está encendida. La función Auto Off PTY muestra “- - - - - - - -”. se activa después de apagar la unidad. La emisora actual no es una emisora RDS. –...
Page 58
– Revise la conexión. Si el indicador de error Se insertó un disco vacío. permanece en pantalla, póngase en contacto No es posible reproducir el disco debido a un con el distribuidor Sony más cercano. problema. – Inserte otro disco. OVERLOAD ...
Page 59
PUSH EJT (Presione expulsar) problema, póngase en contacto con el No es posible expulsar el disco. distribuidor Sony más cercano. – Presione (expulsar). Si entrega la unidad para su reparación a causa de problemas en la reproducción de CD, lleve READ el disco que se utilizó...