Table of Contents
Advertisement
[§]
AUX input jack page 13
To connect a portable audio device.
[l]
OPEN button page 5
[ID
~
(BACK) button page 8
To return to the previous display.
[ID
Receptor for the card remote
commander
@I
SEEK -/+ buttons
CD/iPod:
To skip tracks (press); skip tracks
continuously (press, then press again within
about 1 second and hold); reverse/fast-
forward a track (press and hold).
Radio:
To tune in stations automatically (press); find
a station manually (press and hold).
[ll]
MODE button page 9, 10
To select the radio band (FM/AM); select the
play mode of iPod.
I12l
BTM button page
9
To start the BTM function.
~
Number buttons
CD/iPod:
Q)/®: ALBUM
-/+
To skip albums (press); skip albums
continuously (press and-hold).
G): REP page 9,11
0:
SHUF page 9,11
@:PAUSE
To pause playback. To cancel, press
again.
Radio:
To receive stored stations (press); store
stations (press and hold).
IHI
DSPl (display)/SCRl (scroll) button
page 9,10
To change display items (press); scroll the
display item (press and hold).
~
RESET button page 4
[I§]
~
(eject) button page 5
To eject the disc.
I1ll
Disc slot page 5
To insert the disc.
The following buttons on the card remote
commander have also different buttons/functions
from the unit. Remove the insulation film before
use (page 4).
1m .. (..... )/..
(~)
buttons
To control CD/radio/iPod, the same as
(SEEK)
-/+ on the unit.
Setup, sound setting, etc., can be operated by
.....
1m
DSPl (display) button
To change display items.
~
VOL (volume)
+/-
button
To adjust volume.
PJI
ATT (attenuate) button
To attenuate the sound. To cancel, press
again.
~
SEl (select) button
The same as the select button on the unit.
During the Quick-BrowZer mode,
(SEL)
(select) is inactive.
fJ]
t
(+)/. (-)
buttons
To control CD/iPod, the same as Q)/®
(ALBUM
-/+)
on the unit.
Setup, sound setting, etc., can be operated by
t..
.
g)
SCRl (scroll) button
To scroll the display item.
~
Number buttons
To receive stored stations (press); store
stations (press and hold).
Note
If the unit is turned off and the display disappears, it
cannot be operated with the card remote commander
unless
(SOURCE)
on the unit is pressed, or
a
disc is
inserted to activate the unit first.
Advertisement
Table of Contents
