Welcome; Getting Started; Resetting The Unit; Preparing The Card Remote Commander - Sony CDX-GT62/PW Operating Instructions Manual

•
4
Welcome!
Thank you for purchasing this Sony Compact
Disc Player. You can enjoy your drive with the
following functions.
• CD playback
You can play CD-DA (also containing CD
TEXT) and CD-RlCD-RW (MP3IWMAlAAC
files (page 16)).
Type of discs Label on the disc
CD-DA
[illo~@ [illo~@
DIGITALAUDID DI G rTALAUDIO
@;.11i
1i 1
11
IReWritableJ
[illo§@
[illOO~@
MP3
DIGITALAUDIO
DI G rTALAUDIO
'imA.inlll
IReWritablel
WMA
AAC
[illo~@
lillo§~
'Will·MII
IReWritablel
• Radio reception
- You can store up to 6 stations per band (FM 1,
FM2, FM3, AM 1 and AM2).
- BIM (Best Tuning Memory): The unit selects
strong signal stations and stores them.
• Search function
Quick-BrowZer: You can quickly and easily
search for a track in a CD, or iPod connected to
this unit (page 8).
• Sound adjustment
- EQ3 stage2: You can choose anyone of 7
preset equalizer curves.
- DSO (Dynamic Soundstage Organizer):
Creates a more ambient sound field, using
virtual speaker synthesis, to enhance the
sound of speakers, even if they are installed
low in the door.
• iPod operation
iPod connection can be made by the dock
connector cable on the rear of the unit.
• Auxiliary equipment connection
An AUX input jack on the front of the unit
allows connection of a portable audio device.
Getting Started
Resetting the unit
Before operating the unit for the first time, or
after replacing the car battery or changing the
connections, you must reset the unit.
Detach the front panel and press the RESET
button with a pointed object, such as a ball-point
pen.
RESET
~r---~
0
II
button
~ L : : ; ; ; ; : ; : : ; ; ; ; : ; : : ; ; ; ; : ; : : ; ; ; ; : ; : : ; ; ; ; : ; : : ; ; ; ; : ; : : ; ; ; ; : ; : : ; ; ; ; : ; : : ; ; ; ; : ; : : ; ; ; ; : ; : : ~ "
Nots
Pressing the RESET button will erase the clock setting
and some stored contents.
Preparing the card remote
commander
Before using the card remote commander for the
first time, remove the insulation film.
Tip
For how to replace the battery, see "Replacing the
lithium battery of the card remote commander" on
page 17.
Setting the clock
The clock uses a 12-hour digital indication.
1
Press and hold the select button.
The setup display appears.
2
Press the select button repeatedly
until "CLOCK-ADJ" appears.
3
Press
(SEEK)
+.
The hour indication flashes.
4
Rotate the control dial to set the hour
and minute.
To move the digital indication, press
(SEEK)
-/+.
5
Press the select button.
The setup is complete and the clock starts.
To display the clock, press
(DSPL).
Press
( DSPL)
again to return to the previous display.