Other Functions; Changing The Sound Settings; Adjusting The Sound Characteristics; Customizing The Equalizer Curve - Eq3 Tune - Sony CDX-GT920U Operating Instructions Manual

Other functions
Changing the sound settings
Adjusting the sound
characteristics
1
Press the multi way encoder.
2
Rotate the multi way encoder until the
desired menu item appears, then
press it.
3
Rotate the multi way encoder to select
the setting, then press it.
The setting is complete.
After 3 seconds, the setting is complete and
the display returns to normal play/reception
mode.
The following items can be set (follow the page
reference for details):
"e" indicates the default settings.
!~
:(1
EQ3 parametric
To select an equalizer type: "Xplod," "Vocal,"
"Edge," "Cruise," "Space," "Gravity," "Custom"
or "off'
(e).
DM+*1
To set the DM+ function "on"
(e)
or "off'
(page
4).
DSO
To select the DSO mode: "I," "2," "3" or "off'
(e).
The larger the number, the more enhanced
the effect.
Balance
To adjust the balance between the right and left
speakers: "R 10" - "0" (
e) -
"L 10"
Fader
To adjust the balance between the front and rear
speakers: "FlO" - "0"
(e) -
"RIO"
Subwoofer
To adjust the subwoofer volume: "+
I
0" - "0"
(e) -
"-10"
("- 00"
is displayed at the lowest setting.)
LPF (Low Pass Filter)
To select the subwoofer cut-off frequency: "off'
(e),
"125Hz" or "78Hz."
AUX Level*2
To adjust the volume level for each connected
auxiliary equipment. This setting negates the
need to adjust the volume level between sources
(page 16).
Adjustable level: "+18 dB" - "0 dB"
(e)-
"-8 dB"
*
I When
CoIUSB
source is activated.
*2 When AUX source is activated.
Customizing the equalizer curve
- EQ3 Tune
"Custom" of EQ3 allows you to make your own
equalizer settings.
1
Select a source, then press the multi
way encoder.
2
Rotate the multi way encoder to select
"EQ3 parametric," then press it.
3
Rotate the multi way encoder to select
"Custom," then push it right.
4
Rotate the multi way encoder to select
"EQ3 Mode Tune," then press it.
S
Rotate the multi way encoder to select
the desired frequency range from
"LOW," "MID" or "HI," then press it.
6
Rotate the multi way encoder to select
the center frequency you wish to
adjust, then press it.
Selectable frequency in each range:
LOW: 60 Hz or 100 Hz
MID: 500 Hz or 1.0 kHz
HI: 10.0 kHz or 12.5 kHz
7
Rotate the multi way encoder to adjust
the equalizer curve.
The volume level is adjustable in I dB steps,
from -10 dB to +10 dB.
8
Press the multi way encoder.
Repeat steps 5 to 8 to adjust other frequency
ranges.
9
Push
(BACK)
down twice.
The display returns to normal play/reception
mode.
To restore the factory-set equalizer curve,
select "EQ3 Mode Initialize" and "Yes" in
step
4.
Tip
Other equalizer types are also adjustable.
•
15