Attaching The Fan Blades - HAMPTON BAY Bay Island Owner's Manual

Finishing the Fan
Installation
1. Move fan into position over the four mounting
studs and secure with the provided washers and
nuts. (Fig. 9)
2. Raise the motor housing up against the
mounting bracket, the four supports inside the
housing should be placed against the four studs
on mounting bracket, twist the housing
clockwise until snug. (Fig. 10)
Studs
Washers
Nuts
6
Studs
Motor
Housing

Attaching the Fan Blades

1. Attach the fan blades to the blade holders using
the screws and rubber washers provided,
tighten screws securely. (Fig. 11)
2. Align motor holes to blade holders and secure
with screws provided, tighten screws securely.
Repeat procedure with remaining blades. (Fig.
11)
Figure 9
WARNING
TO REDUCE THE RISK OF PERSONAL INJURY, DO
NOT BEND THE BLADE HOLDERS WHILE
INSTALLING, BALANCING THE BLADES, OR
CLEANING THE FAN. DO NO INSERT FOREIGN
OBJECTS BETWEEN ROTATING FAN BLADES.
Figure 10
Screws
Screws
Blade
Rubber
Washers
Blade Holder
Figure 11