Serial Plate; Declaration Of Conformity; Manufacturer's Address; Applied Standards - Schaerer Coffee Prime Operating Instructions Manual

www.schaerer.com
10

Serial plate

The serial plate is located on the rear side of the service door.
In the event of a fault of warranty case, please quote the data on the serial plate.

Declaration of conformity

Manufacturer's address

Manufacturer
Schaerer AG
P.O.Box
Allmendweg 8
CH-4528 Zuchwil, Switzerland
Tel. +41 (0) 32 681 62 00
F +41 (0)32 681 64 04
info@schaerer.com
www.schaerer.com

Applied standards

The aforementioned manufacturer declares herewith that this machine complies with all rele-
vant stipulations of the specified directives. In case of any modifications of the units that have
not been approved by Schaerer, this declaration is rendered invalid. The following harmonised
standards have been applied. A quality management system certified by Bureau Veritas, in ac-
cordance with SN EN ISO 9001: 2008, has been used to ensure the proper adherence to the
requirements.
CE conformity
Machinery Directive 2006/42/EC
•• EN 60335-1:2002 +A1 +A11 +A12 +A13
+A14 +A2
•• EN 60335-2-75:2004 +A1 +A11 +A12
+A2
•• EN 62233:2008-04
International (CB)
Safety
•• IEC 60335-1 Ed4.2:2006
•• IEC 60335-2-14 Ed 5.1:2008
•• IEC 60335-2-15 Ed 5.2:2008
•• IEC 60335-2-75 Ed 2.2:2009
•• IEC 62233 Ed1:2005
Responsible for documentation
Schaerer AG
Hans-Ulrich Hostettler
P.O.Box
Allmendweg 8
CH-4528 Zuchwil, Switzerland
EMC Directive 2004/108/EC
•• EN 55014-1:2006 +A1
•• EN 55014-2:1997 +A1 +A2
•• EN 61000-3-2:2006 +A1 +A2
•• EN 61000-3-3:2008
•• EN 61000-6-2:2005
•• EN 61000-6-4:2007 +A1
EMC
•• CISPR 14-1 Ed 5.1: 2009
•• CISPR 14-2 Ed 1.2: 2008
•• IEC 61000-3-2 Ed 3.2: 2009
•• IEC 61000-3-2 Ed2.1:2001
•• IEC 61000-3-3:2008
•• IEC 61000-6-2:2005
•• IEC 61000-6-4:2006 +A1
Product description
BASCP_EN
V02 | 09.2011