TOHATSU BFT 250A Owner's Manual page 81

WATER SEPARATOR
ALIGNING SUSPENSION
MARK STRAP
11. Position the aligning mark as
shown in the figure when
installing the suspension strap on
the water separator.
SERVICING YOUR OUTBOARD MOTOR
PROTRUDED PORTION
SUSPENSION STRAP
DRAIN JOINT
12. The drain joint should be
positioned within the protruded
portion of the suspension strap as
shown in the figure.
13. Prime the engine using the
priming bulb (p.37). Check for
fuel leaks. Repair any fuel leaks if
necessary.
If the buzzer sounds or water or
sediment accumulation is found in the
fuel filter, inspect the fuel tank.
Clean the fuel tank and tank filter if
necessary. It may be necessary to
drain the fuel tank completely and
refill with fresh gasoline.
79