Manufacturer's Warranty - Tools; Ec Declaration Of Conformity - Hilti TE 70 Operating Instructions Manual

For EC countries only
Disposal of electric tools together with household waste is not permissible.
In observance of European Directive 2002/96/EC on waste electrical and electronic equipment
and its implementation in accordance with national law, electric tools that have reached the end
of their life must be collected separately and returned to an environmentally compatible recycling
facility.
en

11. Manufacturer's warranty - tools

Hilti warrants that the tool supplied is free of defects
in material and workmanship. This warranty is valid
so long as the tool is operated and handled correctly,
cleaned and serviced properly and in accordance with
the Hilti Operating Instructions, and the technical
system is maintained. This means that only original
Hilti consumables, components and spare parts may
be used in the tool.
This warranty provides the free-of-charge repair or
replacement of defective parts only over the entire
lifespan of the tool. Parts requiring repair or replace-
ment as a result of normal wear and tear are not
covered by this warranty.

12. EC declaration of conformity

Designation:
Type:
Year of design:
We declare, on our sole responsibility, that this
product complies with the following directives
and standards: as of 28.12.2009 98/37/EC, as of
29.12.2009 2006/42/EC, 2004/108/EC, EN 55014‑1,
EN 55014‑2, EN 60745‑1,
EN 61000‑3‑2, EN 61000‑3‑11.
30
Additional claims are excluded, unless stringent na-
tional rules prohibit such exclusion. In particular,
Hilti is not obligated for direct, indirect, incidental
or consequential damages, losses or expenses in
connection with, or by reason of, the use of, or
inability to use the tool for any purpose. Implied
warranties of merchantability or fitness for a par-
ticular purpose are specifically excluded.
For repair or replacement, send the tool or related
parts immediately upon discovery of the defect to
the address of the local Hilti marketing organization
provided.
This constitutes Hilti's entire obligation with regard
to warranty and supersedes all prior or contempor-
aneous comments and oral or written agreements
concerning warranties.
Hilti Corporation
Combihammer
TE 80‑ATC/ TE 70‑ATC/
TE 70
2007
Peter Cavada
Head of BA Quality and Process
Management
Business Area Electric Tools & Ac-
cessories
11 2007
EN 60745‑2‑6,
Jan Doongaji
Senior Vice President
Business Unit Drilling
and Demolition
11 2007