Remote Control And Its Functions - Toshiba RAS-M10UKV-E3 Service Manual

8-5. Remote control

8-5-1. Remote control and its functions

RAS-M10UKCV, RAS-M13UKCV, RAS-M16UKCV
1 1
1 Infrared signal emitter 1 1
Transmits a signal to the indoor unit.
2 2 2 START/STOP button 2 2
Press the button to start operation.
(A receiving beep is heard.)
Press the button again to stop operation.
(A receiving beep is heard.)
If no receiving sound is heard from the indoor unit,
press the button twice.
3 3 3 Mode select button (MODE) 3 3
Press this button to select a mode.
Each time you press the button, a mode is
selected in a sequence that goes from A : Auto
changeover control,
: Heat, : Fan only, and back to A.
(A receiving beep is heard.)
4 4 4 Temperature button (
4 4
,.......The set temperature is increased up to 30°C.
9.......The set temperature is dropped down to 17°C.
(A receiving beep is heard.)
5 5 5 Fan speed button (FAN)
5 5
Press this button to select fan speed. When you
select AUTO, the fan speed is automatically
adjusted according to the room temperature.
You can also manually select the desired fan
speed from among five settings.
(LOW , LOW +
+
MED , HIGH
(A receiving beep is heard.)
6 6 6 6 6 Auto louver button (SWING)
Press this button to swing the louver.
(A receiving beep is heard.)
Press the FIX button to stop the louver swinging.
(A receiving beep is heard.)
7 Set louver button (FIX) 7 7
7 7
Press this button to adjust the air flow direction.
(A receiving beep is heard.)
8 8 8 Off timer button (OFF)
8 8
Press this button to set the OFF timer.
9 9 9 9 9 On timer button (ON)
Press this button to set the ON timer.
! ! Reserve button (SET) !
! !
Press this button to reserve time settings.
(A receiving beep is heard.)
" " " " Cancel button (CLR) "
Press this button to cancel ON timer and OFF
timer. (A receiving beep is heard.)
# # # # # High power button (Hi POWER)
Press this button to start the high power
operation.
: Cool, : Dry,
)
, MED ,
)
$ $ $ $ $
Memory button (MEMO)
Press this button to stand by memorizing the
settings.
Press the button again for more than 4 seconds
to memorize the setting indicated on the remote
control and
% %
% % %
Automatic operation button (AUTO)
Press this button to operate the air conditioner
automatically.
(A receiving beep is heard.)
& & & & &
ECO timer button (ECO)
Press this button to start the ECO timer (OFF
timer) operation.
You can select the OFF timer time from among
four settings (1,3,5 or 9 hours).
( ( (
( (
FILTER button
Press this button to turn off the filter cleaning
lamp on the indoor unit.
Press this button after cleaning the air filter.
) ) )
) )
PRESET button
Press this button to operate the air conditioner
according to settings memorized by the MEMO
button.
~ ~ ~
~ ~
TIMER button
Use this button to change the clock, ON timer,
and OFF timer times.
To forward the time, press the "TIMER " button.
To set back the time, press the "TIMER " button.
4 4 4
2 2
5 5
6 6
7 7 7
9 9
8 8 8
1 1 6 6 16
– 62 –
mark is indicated.
1
AUTOA
A
B
PRESET
START/STOP
AUTO
FAN MODE
SWING
ECO Hi-POWER
TIMER
MEMO
FIX
ON OFF SET CLR
FILTER
RESET CLOCK CHECK
13 17
3 3
1 1 4 4 14
1 1 5 5 15
12 12
13
17
11 11
10 10
1 1 8 8 18