Attaching The Fan Blades - HAMPTON BAY Farmington Owner's Manual

Attaching the Fan Blades

NOTE
MOTOR IS SHIPPED WITH RUBBER MOTOR
STOPS TO PREVENT MOVEMENT DURING
TRANSPORTATION. REMOVE MOTOR STOPS
PRIOR TO ATTACHING BLADE BRACKETS.
(FIG. 16)
NOTE: Your fan blades are reversible. Select the
blade side finish which best accentuates your
decor.
Your fan features revolutionary advancements for
quick and easy blade installation.
The screws are already installed on the blade arms,
attach the blade arm support plate and blades to the
blade arms using the screws already installed on
the blade arms. (Fig. 17) Be sure the screws on the
blade arms slide to the narrow portion of the key
hole slot on the blade arm support plate, by
pushing the tab back until the rectangle plastic
band falls into the hole on the blade (this locks the
blade assembly). To remove the blade from the
blade arm, pull the rectangle plastic band up and
slide the screws toward the wide portion of the key
hole slot on the blade support plate. This will
loosen the blade and blade arm support plate and
this will allow you to remove the blade from the
blade arm. (Fig. 18)
Fasten blade assembly to motor using the screws
supplied. (Fig. 19)
Rubber Packing Mounts
Screws
Blade Arm
Support Plate
Blade Arm
Figure 16
Blade
Screws
Blade Arm
Figure 17
WARNING
TO REDUCE THE RISK OF PERSONAL INJURY,
DO NOT BEND THE BLADE ARMS WHILE
INSTALLING, BALANCING THE BLADES, OR
CLEANING THE FAN. DO NO INSERT FOREIGN
OBJECTS BETWEEN ROTATING FAN BLADES.
Tab
Rectangle
Plastic
Band
Blade Arm
Support Plate
Blade
Figure 18
Motor
Blade Arm
Figure 19
9