Standard Ceiling Mounting - HAMPTON BAY Farmington Owner's Manual

Finishing the Fan
Installation

Standard Ceiling Mounting

WARNING
LOCKING SLOTS OF CEILING CANOPY ARE
PROVIDED ONLY AS AN AID TO MOUNTING.
DO NOT LEAVE FAN ASSEMBLY UNATTENDED
UNTIL ALL FOUR CANOPY SCREWS ARE
ENGAGED AND FIRMLY TIGHTENED.
Slide canopy up to the ceiling as shown in Figure
14. Make sure you place the wires safely into the
outlet box. Secure the canopy to the mounting
bracket with the four screws with your fan. Raise
up canopy ring and line up the 4 tabs with the 4
grooves on the canopy. Once lined up, slide the
canopy ring and secure it to the canopy until snug.
WARNING
MAKE SURE THE TAB ON THE MOUNTING
BRACKET PROPERLY SITS IN THE GROOVE IN
THE HANGER BALL BEFORE ATTACHING THE
CANOPY TO THE BRACKET BY TURNING THE
HOUSING UNTIL IT DROPS INTO PLACE.
8
Close-to-Ceiling Mounting
Remove the fan from the hook on the mounting
bracket. Secure the canopy to the mounting
bracket with four screws included with your fan.
(Fig. 15) Raise up canopy ring and line up the 4
tabs with the 4 grooves on the canopy. Once lined
up, slide the canopy ring and secure it to the
canopy until snug.
Outlet Box
Ceiling
Mounting
Bracket
Outlet Box
Ceiling
Mounting
Bracket
Canopy
Ring
Screws
Canopy
Canopy
Ring
Figure 14
Screws
Canopy
Figure 15