Safety Warning - OPENTEL ODT 1500C User Manual

1. SAFETY WARNING

This product has been manufactured to comply with international safety
standards. Please read the following safety precautions carefully.
MAINS SUPPLY : 100-240V AC 50/60Hz
Operate this product only from the type of power supply indicated on the marking
label. If you are not sure of the type of power supplied to your home, consult your
local power company.
-Disconnect the product from the mains before you start any maintenance or
installation procedures.
OVERLOADING : Do not overload a wall outlet, extension cord or adapter as this
may result in electric fire or shock.
LIQUID : The product should not be exposed to liquid of any kind. In addition, no
objects filled with liquid should be placed on the apparatus.
CLEANING : Disconnect the product from the wall outlet before cleaning.
-Use a light damp cloth (no solvents) to dust the product.
VENTILATION : The slots on top of the product must be left uncovered to allow
proper airflow into the unit.
-Do not stand the product on soft furnishings or carpets.
-Do not stack electronic equipments on top of the product.
ATTACHMENTS : Do not use any unsupported attachments as these may be
hazardous or cause damage to the product.
CONNECTION TO THE AERIAL : Disconnect the product from the mains before
connecting or disconnecting the cable from the aerial. Failure to do so can damage
the aerial.
CONNECTION TO THE TV : Disconnect the product from the mains before
connecting or disconnecting the cable from the TV. Failure to do so can damage the
TV.
EARTHING : The aerial cable must be buried in the ground.
LOCATION : Place the product indoors to avoid exposing it to lightning, rain or sun.
-Do not place it near a radiator or heat register.
-Make sure it has more than 10 cm clearance from any appliances susceptible to
electromagnetic influences, such as a TV or a VCR.
2 SAFETY WARNING
-Do not block the openings with any object, and do not place the product on a
bed, sofa, rug, or other similar surface.
-If you place the product on a rack or a bookcase, ensure that there is adequate
ventilation and that you have followed the manufacturer's instructions for
mounting.
-Do not place the product on an unstable cart, stand, tripod, bracket, or table
where it can fall. A falling product can cause serious injury to a child or adult, and
serious damage to the appliance.
LIGHTNING, STORM or NOT IN USE : Unplug the product from the wall outlet
and disconnect the antenna during a thunderstorm or when left unattended and
unused for long periods of time. This will prevent damage to the unit due to
lightning and power-surges.
EXTRANEOUS OBJECTS : Do not insert anything through the openings in the
unit, where they can touch dangerous voltage points or damage parts
REPLACEMENT of PARTS : When replacement of parts is required, be sure the
service technician uses replacement parts specified by the manufacturer or those
that have the same characteristics as the original part. Unauthorized substitution
may result in additional damage to the unit.
Warning
To avoid damage of the power cord or plug;
-Do not modify or process the power cord or plug arbitrarily.
-Do not bend or twist the power cord.
-Make sure to disconnect the power cord holding the plug.
-Keep heating appliances as far as possible from the power cord in order to
prevent the cover vinyl from melting.
-The main plug shall remain readily operable.
To avoid electrical shock;
-Do not open the main body.
-Do not insert metal or inflammable objects inside the product.
-Do not touch the power plug with wet hands.
-Disconnect the power cord in case of lightning.
To avoid damage of product;
-Do not use the product when it is out of order. If you continue to use the product
when defective, serious damage can be caused to it. Make sure to contact your
local product distributor if the product is out of order.
-Do not insert metal or alien substance into the slots for the modules or
Smartcards.
It may cause damage to the product and reduce its life span.
The socket-outlet shall be installed near the equipment and shall be easily
accessible
.
3
SAFETY WARNING