Table of Contents
Advertisement
5. B. Setting Up
① ① ① ① Language
② ② ② ② Country
③ ③ ③ ③ Antenna
12
QUICK START & INSTALLATION
Select the preferred menu language by using
the
and
buttons, and press
to
continue. The selected language will also be
the main language for audio and subtitling.
Select the country where this receiver well be
used.
Select if the active antenna power should be
on or off with
and
. Setting this to "On"
will feed +5 Volt to the antenna output. When
you
are
done,
select
the
"Next"
by
pressing
.
④ ④ ④ ④ Search
Just wait for the channel search to finish (This
automated procedure may take several minutes
to complete). To interrupt the channel search,
press
If no channels are found, verify that your
antenna cable is connected and that the
antenna is correctly aligned toward a digital TV
transmitter. You may re-start the channel search
by pressing
When channel searching is done, select the "Next" menu item to continue to settings
⑤ ⑤ ⑤ ⑤ Setting
• At this view, you may change some settings
if needed:
• TV Format: Select the type of TV you have
(4:3 or 16:9) by using
you have a widescreen TV.
⑥ ⑥ ⑥ ⑥ Done
The installation is completed. Press
"Done!" to save all channels and settings and
start watching TV, or press
"Back" with
change anything.
If you fail to automatic channel search, please refer to page 26, 5.C. Advaced
channel search in 7. Menu Operation.
.
.
and
. Use 16:9 if
on
and select
if you want to go back and
QUICK START & INSTALLATION
13
Advertisement
Table of Contents
