Safety Precautions; General Features - OPENTEL ODT 4000V User Manual

1. SAFETY PRECAUTIONS

This receiver has been manufactured to satisfy the
international safety standards.
Please read the following recommended safety precautions carefully.
MAINS SUPPLY : 100~240V AC 50/60Hz
LOCATION : Locate the receiver indoor.
Locate receiver away from potential hazards such as houseplants, lighting, raining
and direct sunlight.
OVERLOADING : Do not overload wall outlets, extension cords or adapters as this
can result in fire or electrical shock.
LIQUIDS : Keep liquids away from the receiver.
CLEANING : Before cleaning, disconnect the receiver from the wall socket.
Use a cloth lightly dampened with water (no solvents) to clean the exterior.
VENTILATION : Do not block the receiver ventilation holes. Ensure that free airflow
is maintained around the receiver.
Never set the receiver on soft furnishings or carpets. Do not use or store the
receiver where it is exposed to direct sunlight, or near heater.
Never stack other electronic equipment on top of the receiver.
Place the receiver at least 30mm from the wall.
ATTACHMENTS : Do not use any attachment that is not recommended by the
manufacturer, as it may cause a hazard or damage the equipment.
CONNECTION: The connector cable has a
voltage in its center core. It is therefore recommended that the receiver is
disconnected from the mains power before connecting or disconnecting this cable.
SERVICING : Do not attempt to service this product yourself. Any attempt to do so
will make the warranty invalid.Refer all servicing to a qualified service agent.
LIGHTNING : If the receiver is installed in an area subject to intense lighting
activity, protection devices for the receiver mains connector and modem telephone
line are essential. The individual manufacturer's instruction for safeguarding other
equipment, such as TV set, Hi-Fi, etc., connected to the receiver, must also be
followed during lighting storms.
2 SAFETY PRECAUTIONS

2. GENERAL FEATURES

- Fully MPEG-2 & DVB Compliant
- Smart Card Interface for Embeded Viaccess
- Input Frequency 174 ~ 862 MHz
- 1 Input Tuner with Loop Through IF Signal
- Supports DVB-T modulation schemes : QPSK, 16-QAM and 64-QAM
- Implements non-hierarchical and hierarchical 2K and 8K system operation
- Fast Booting & Auto Scan
- Quick Channel Changing
- Max. 4000 Channels(TV & Radio) Programmable
- User Friendly 256 Colors OSD & Easy GUI
- A lot of OSD Language supported
- Supports EPG, PIG
- Supports Teletext, Subtitle using OSD
- Radio Channel Background Display
- Favorite Channel List Programmable
- Master PIN Code Function & Parental Lock Function
- 20 Steps Volume Control
- Automatic Detection of Forward Error Correction
- Automatic NTSC / PAL Detection and Simple Video Converter (NTSC <-> PAL)
- Window based S/W Download Program Supported by RS232 Serial Port
- Set to Set Download (Main Program, Channel Data)
- 4:3, 16:9 Letter Box & Teletext using OSD
- 7 Segment-4 Digit Display
- 5 Keys on the Front Panel (Power On/Off, Channel Up/Down, Volume Up/Down)
- 2 SCART Output for TV & VCR
- 3 RCA Output for Video, Audio L/R
- Wide PLL RF Modulator (PAL B/G, I, D/K)
- S/PDIF Output for Digital Audio
3
GENERAL FEATURES