Table of Contents
Advertisement
5.A. TV and Audio Settings
• TV Format: Select the type of TV you have (4:3 or 16:9) by using
and
. Use 16:9 if you have a widescreen TV.
• Signal: This setting only affects SCART-cable connected receivers. The "RGB"
mode usually gives a better and sharper picture, but some older TVs can only use
the "CVBS" mode.
The "RGB" mode usually require a special (fully connected) SCART cable. Some
receiver models also include the "S-Video" option. If this option is selected, the
picture may appear better, but require a S-Video compatible TV and cable to work.
• RF Channel: This setting is only affecting receivers equipped with an RF
antenna output contact. By using the
outgoing RF channel number. This can be useful on olders televisions to get a
picture on a certain channel, or to improve picture quality.
• OSD Size: The "OSD Size:" setting can be used to specify how much of the TV
picture area the receiver can use for graphics and text. Older TV's usually show
less of the picture, while new ones display more. Example: If you have a modern
TV and select the "Large" setting, more information can be shown on the TV
screen, for example in the TV guide.
24
MENU OPERATION
In the "TV and Audio Settings" view
you can modify the properties of the
audio and video signals to suit your
TV and audio equipment.
and
button, you can change the
• Dolby Digital output: Select the audio format for digital audio output.
The factory setting is PCM format. Note: If you have selected Dolby Digital
to On, and the sound for a TV programme is transmitted in Dolby™ Digital
format, no sound will be output to SCART or RCA-cables.
5.B. Regional Settings
Using the regional settings, you
may modify settings to suite your
geographical position or cultural
settings. Among other things, this
can be the date and time format.
• Country: Select the country where this receiver will be used with
.
This will affect the time zone settings.
Clock adjustment : Select "Manual" or "Automatic" mode using
key. If you want to change the time manually in time offset menu, please set
this "Manual" mode.
Time offset: If needed, adjust the time offset to fit your local time. Change
the time in 15 minute steps by using
and
and
and
.
25
MENU OPERATION
Advertisement
Table of Contents
