OPENTEL ODT 1500C User Manual page 6

4. B. REAR PANEL
1) ANTENNA: Connects the aerial cable.
2) LOOP OUT : Connects to the RF IN of the TV or VCR using an RF cable.
3) RS-232C : Connects to the PC to update software.
4) VCR : Connects to the VCR or DVD using a VCR SCART cable.
5) TV : Connects to the TV using a TV SCART cable.
6) S/PDIF : Connects to the audio system using an S/PDIF cable. (digital audio)
7) AUDIO L/R : Connects to the TV or VCR using an RCA cable.
8) VIDEO : Connects to the TV or VCR using an RCA cable.
8 HARDWARE DESCRIPTION
4. C. REMOTE CONTROL UNIT
: This button is used to toggle between normal and muted sound.
: The help button opens and closes built in help information.
: This is used to switch the receiver in and out of standby mode.
: Switches between TV- and Radio mode.
: Freeze the TV picture.
: The Teletext button opens and closes the Teletext for the current
channel.
: This button is used to easily input multiple digit TV channel numbers.
: These buttons are used to enter numerical values and to select a
specific channel directly by entering its number.
: The Options button is used to open and close a menu of temporary
viewing options (Like subtitling and language options) for the current
programme.
: Exits any open menu or information mode and goes back to watching
TV.
: The Menu button opens the system main menu. Press again to hide the
menu.
9
HARDWARE DESCRIPTION