Advertisement

Quick Links

INSTRUCTION ABOUT 'WEEE' SYMBOL
I/B parenthesis to offer information for user.
English
This marking shown on the product or its literature,
indicates that it should not be disposed with other
household wastes at the end of its working life.To
prevent possible harm to the environment or human
health from uncontrolled waste disposal, please
separate this from other types of wastes and recycle it
responsibly to promote the sustainable reuse of material resources.
Hosehold users should contact either the retailer where they
purchased this product, or their local government office, for details of
where and how they can take this item for environmentally safe
recygling.
Business users should contact their supplier and check the terms and
conditions of the purchase contract.This product should not be mixed
with othercommercial wastes for disposal.
German
Die Kennzeichnung auf dem Produkt bzw. auf der
dazugehörigen Literatur gibt an,dass es nach seiner
Lebensdauer nicht zusammen mit dem normalen
Haushaltsmüll entsorgt werden darf. Entsorgen Sie
dieses Gerät bitte getrennt von anderen Abfällen,
um der Umwelt bzw. der menschlichen Gesundheit
nicht durch unkontrollierte Müllbeseitigung zu schaden
.Recyceln Sie das Gerät, um die nachhaltige Wiederverwertung von
stofflichen Ressourcen zu fördern. Private Nutzer sollten den Händler,
bei dem das Produkt gekauft wurde, oder die zuständigen Behörden
kontaktieren, um in Erfahrung zu bringen,wie sie das Gerät auf
umweltfreundliche Weise recyceln können. Gewerbliche Nutzer sollten
sich an Ihren Lieferanten wenden und die Bedingungen des
Verkaufsvertrags konsultieren. Dieses produkt darf nicht zusammen
mit anderem Gewerbemüll entsorgt werden.
User's
Manual
ODT 1500C

Advertisement

Table of Contents
loading

Summary of Contents for OPENTEL ODT 1500C

  • Page 1 Business users should contact their supplier and check the terms and Verkaufsvertrags konsultieren. Dieses produkt darf nicht zusammen conditions of the purchase contract.This product should not be mixed mit anderem Gewerbemüll entsorgt werden. with othercommercial wastes for disposal. ODT 1500C...
  • Page 2: Table Of Contents

    Table of Contents Table of Contents 1. SAFETY WARNING 2. GENERAL FEATURES 3. HOW TO CONNECT YOUR RECEIVER 4. HARDWARE DESCRIPTION 5. QUICK START & INSTALLATION 6. WATCHING TV 7. MENU OPERATION 8. FIRMWARE UPGRADE THROUGH TERRESTRIAL 9. TROUBLESHOOTING 10. TECHNICAL SPECIFICATIONS...
  • Page 3: Safety Warning

    1. SAFETY WARNING -Do not block the openings with any object, and do not place the product on a bed, sofa, rug, or other similar surface. -If you place the product on a rack or a bookcase, ensure that there is adequate This product has been manufactured to comply with international safety ventilation and that you have followed the manufacturer’s instructions for mounting.
  • Page 4: General Features

    3. HOW TO CONNECT YOUR RECEIVER 2. GENERAL FEATURES - Fully compliant with MPEG-2 & DVB Please DO NOT plug in the main power supply cord until you - Smart Card interface for embedded Conax have finished all the connections. - Input frequency 145 ~ 863 MHz - One input tuner with loop through IF signal - Supports DVB-T modulation schemes: QPSK, 16-QAM and 64-QAM...
  • Page 5: Hardware Description

    4. HARDWARE DESCRIPTION 4) CONNECTING EXTERNAL AUDIO HI-FI SYSTEM To connect any external Audio Hi-Fi system, the receiver is provided with two 4. A. FRONT PANEL RCA connectors at the rear, marked “Audio L and R” respectively to connect the left and right audio. In case of Audio Hi-Fi systems with digital audio input, please connect to 1) STANDBY BUTTON S/PDIF.
  • Page 6 4. C. REMOTE CONTROL UNIT 4. B. REAR PANEL : This button is used to toggle between normal and muted sound. 1) ANTENNA: Connects the aerial cable. : The help button opens and closes built in help information. 2) LOOP OUT : Connects to the RF IN of the TV or VCR using an RF cable. : This is used to switch the receiver in and out of standby mode.
  • Page 7: Quick Start & Installation

    5. QUICK START & iNSTALLATION 5. A. System Connection : To go back one level at a time within menus or screens and save any changes. ① ① ① ① Antenna TV/VIDEO Connection : Cursor up and down - Used to move up and down the highlight in menues.
  • Page 8 5. B. Setting Up ④ ④ ④ ④ Search ① ① ① ① Language Just wait for the channel search to finish (This automated procedure may take several minutes Select the preferred menu language by using to complete). To interrupt the channel search, press buttons, and press If no channels are found, verify that your...
  • Page 9: Watching Tv

    6. WATCHING TV 6.B. Options This chapter describes how you watch TV and listen to radio using the receiver. Thanks to the advantages of the digital TV transmissions, extra features are added to Pressing the button will open the "Options" menu. the broadcast, such as information about the current and next programme and extra options;...
  • Page 10 The TV guide starts empty and is filled with program information over a period of • . Lock Channel: Sets a permanent lock on the current channel. time. When new information arrives, it is shown directly on screen. The time to This option is only available if "Channel lock active:"...
  • Page 11: Menu Operation

    7. MENU OPERATION The main menu is classified into several sub menus which will carry out the various operations individually. MENU STRUCTURE MAIN MENU After installing your antenna and receiver with appropriate connectors, plug in the AC main power and turn on the receiver. Press the “...
  • Page 12 You must give all lists a specific name. Select a suitable name by using the • Menu language: Select the preferred language for the system menues. buttons. • Text size: Select the size of typeface used for the text in menues, guide, etc. Hint: Select "Select channels"...
  • Page 13 4. Timer 3. Parental Control To open the "Parental Control" menu you will be asked to enter your access PIN code. All parental control features work on a locking concept with the PIN code as your entrance key. The PIN code is set to 0000 at the factory! Timers are used to program the receiver to wake up at a certain time and tune to a •...
  • Page 14 5.A. TV and Audio Settings • Dolby Digital output: Select the audio format for digital audio output. The factory setting is PCM format. Note: If you have selected Dolby Digital to On, and the sound for a TV programme is transmitted in Dolby™ Digital In the "TV and Audio Settings"...
  • Page 15 5.C. Channel Search Frequency: Specify the transponder frequency that you would like to search by using the number buttons on the remote control. You can also use to move the input focus left and right, for example if you Channel searches are done to update your channel table. New channels may be found entered the wrong number.
  • Page 16: Firmware Upgrade Through Terrestrial

    6. User's Manual Channel Search Results A channel search may take several minutes before it is completed. All new found channels are listed on the screen and automatically added to the "All channels" • The built-in user instructions can be read by selecting "User's Manual" in channel list.
  • Page 17: Troubleshooting

    9. TROUBLESHOOTING 10. TECHNICAL SPECIFICATIONS About the Receiver 1. Power Supply Problem Solution Type : SMPS Does not display LED on the - Connect the power cord to the power outlet Input Voltage : 100~240VAC 50/60 Hz front panel or the receiver has no properly.
  • Page 18 5. Audio Decoder System Decoding : MPEG-1 ISO/IEC 11172-3 Layer I & II Audio Mode : Mono, Dual, Stereo, Joint Stereo Sampling Frequency : 32, 44.1, 48 KHz 6. Audio/Video Output TV SCART : CVBS, RGB, Audio L/R VCR SCART : CVBS, Audio L/R RCA Jack : CVBS, Audio L/R...

Table of Contents