Table of Contents
Advertisement
programmed, press the
"TOP" button to start/stop
the countdown. (See fig-
ure 15). Note: The shortest
interval that can be set is 5
seconds. The backlight
function is disabled when
the interval timer is run-
ning.
10. Distance Countdown
(DISTÚ)
Your Turbo® Elite is
equipped with Distance
Countdown feature. This
allows you to set an alarm
FIGURE 15
when the selected mileage
is reached. To enter the
Distance Countdown
mode, press the "MODE"
button repeatedly until
"DISTÚ" appears in the
14
Dot-matrix Display Area.
Note: if your display says
"INT, press the "SET" but-
ton to change to "DISTÚ"
To set the Distance
Countdown, hold the "SET"
button for three seconds.
The hour digit will begin
flashing. Press the
"MODE" Button until the
desired number appears.
(Hold down the "Mode"
button to scroll quickly)
Press the "SET" button once
to set this number and
advance to minutes. Repeat
this process until minutes
and seconds are set to the
desired settings. Press the
"SET" button to exit pro-
gramming mode. Once
the time interval timer is
programmed, press the
"TOP" button to stop and
start the Distance
Countdown. The backlight
function is disabled when
the Distance Countdown is
running.
Note: The shortest distance
that can be set is .01
miles/km.
COMPUTER
FUNCTIONS
Speedometer (SPEED)-
Your current speed is
always displayed in large
digits on the top line of the
LCD screen. The speed is
displayed up to 99.9 M/h
(99.9 Km/h) with a resolu-
tion of 0.1 M/h (0.1
Km/h)
Average Speed (AVSPD)-
The Average Speed is
shown on the lower line
Digital Display Area up to
99.9 M/h (99.9 Km/h)
with a resolution of 0.1
M/h (0.1 Km/h)
The average speed is
based upon the ATM time.
The resolution of the aver-
age speed data on the
Digital Display Area is
shown in 0.1M/h or Km/h
increments. (See figure 16)
Maximum Speed (MXSPD)-
The Maximum Speed is
shown on the lower line of
the Digital Display Area up
to 99.9 M/h (99.9 Km/h)
with a resolution of 0.1
FIGURE 16
M/h (0.1 Km/h) The max-
imum speed is retained in
memory and updated
when a higher speed is
maintained for three sec-
onds. The maximum speed
can be reset by pressing
the "SET" button for three
seconds. (See figure 17)
Auto Start/Stop Timer
(ATM)-
In ATM mode the timer
function records the actual
time spent riding. It oper-
ates only when there is
speed input and is dis-
played In the Digital
Display Area of the screen
Timer Mode (TIMER)-
In TIMER mode the stop-
watch function will operate
15
Hide quick links:
Advertisement
Table of Contents
