Assembly - GreenWorks 26022 Owner's Manual

ASSEMBLY INSTRUCTIONS
W A R N I N G
Do not allow familiarity with this product to make you careless. Remember that a careless
fraction of a second is sufficient to inflict serious injury.
W A R N I N G
Always wear safety goggles or safety glasses with side shields when operating power tools. Failure
to do so could result in objects being thrown into your eyes, resulting in possible serious injury.
W A R N I N G
Do not use any attachments or accessories not recommended by the manufacturer of this product.
The use of attachments or accessories not recommended can result in serious personal injury.
ASSEMBLING THE HANDLE (See Figure 3)
• Remove any packing material that may have been inserted between the upper and lower
handles for shipping purposes.
• Align the holes (4) on the upper handle (1) with the holes on the middle handle (2). Insert the
bolts (5), and use the wing nuts (6) to tighten them.
• Align the holes (7) on the middle handle (2) and the lower handle (3). Insert the bolts (5), and
tighten them using the wing nuts (6) provided.
ASSEMBLING THE DISCHARGE DIRECTIONAL CONTROL (See Figure 3)
• Align the holes (11) on the upper tubing (8) with the holes on the lower tubing (9). Insert the
hitch pin (10).
11
9
8
2
10
8
9
3
11
1
5 4 6
7
Fig. 3