GreenWorks 26022 Owner's Manual page 16

MAINTENANCE
IMPELLOR REPLACEMENT
1
• Remove the nut from the
left hand side of the impellor
shaft.
4
• Remove the nut from the
impellor shaft.
7
screw and washer
• Remove the 2 screws and
2 washers.
10
• Withdraw the impellor shaft
from the left hand side.
2
• Remove the 10 screws
from the side cover.
5
• Remove the 3 screws
holding the pulley support
plate.
8
• Remove the pulley and belt.
11
spacer washer
• Withdraw the old/damaged
impellor. Be sure to keep
the 2 spacer washers from
the right hand side of the
impellor.
16
3
spring
• Be sure not to lose the 2
springs.
6
spacer washer
• Remove the plate and the
two spacer washers.
9
• Remove the impellor shaft
nut from the right hand
side.
12
• Insert the impellor shaft in
the new impellor and place
the 2 washers on the right
hand side.