GreenWorks 26022 Owner's Manual page 18

MAINTENANCE
REPLACING THE SCRAPER (See Figure 10)
W A R N I N G
In order to avoid serious personal injury, turn off the Snow Shovel and unplug it before performing
any maintenance.
Use only the manufacturer's original replacement parts.
• Place the Snow Shovel on the ground or on a work bench. Position the Snow Shovel so
that the impeller is facing up.
• Remove the five (5) screws that are located beneath the impeller that secure the scraper
to the housing using a phillips screwdriver (Fig. 10)
• Remove the scraper, and discard it in the proper manner.
• Snap the new scraper into position, and attach it to the Snow Shovel by reinstalling the
five (5) screws. Tighten the screws.
STORAGE
• Allow the motor to cool down before storing.
• Store the Snow Shovel in a locked location in order to prevent unauthorized use or damage.
• Store the Snow Shovel in a dry, well-ventilated area.
• Store the Snow Shovel out of the reach of children.
CLEANING
W A R N I N G
In order to avoid serious personal injury, turn off the Snow Shovel and unplug it before cleaning or
servicing.
Use a small brush to clean the outside of the Snow Shovel. Do not use strong detergents.
Household cleaners that contain aromatic oils such as pine and lemon, and solvents such as
kerosene can damage the plastic housing and handles. Wipe off any moisture using a soft cloth.
18
Fig. 10