Craftsman 75118 Operator's Manual page 13

High Flow Inflator/Deflator
Adaptor
For larger inflatable items, you
may wish to use the High Flow
Inflator/Deflator Adaptor as follows:
1. Connect the Quick-Connect Universal
Valve Adaptor to high flow
inflator/deflator adaptor as shown.
2. Choose nozzle to be used to inflate or
deflate. NOTE: The seal ring may be
used with any of the nozzles to prevent
air from leaking out of inflatables with
very large air inlets. Insert nozzle thru
seal ring as shown.
3. The high flow inflator/deflator adaptor
has an "inflation" outlet and "deflation"
outlet. Attach the nozzle to the
preferred outlet. NOTE: "Inflation" and
"Deflation" are marked at outlets.
Inflation Position
Deflation Position
4. Insert nozzle into inflatable and start
inflator.
NOTE: If inflatable is not getting firm
enough, place thumb over the "deflation"
outlet to allow air to go directly into the
inflatable.
WARNING: Risk of Bursting. DO NOT
over-inflate. Keeping thumb over
"Deflation" outlet could cause inflatable
to over-inflate. Use caution when
placing thumb over "Deflation" outlet.
12