Operation - Glacial 8LDIECHK-SC-WFC-VW-SSP User Manual

Self cleaning hot & cold hidden bottle water cooler with display
Table of Contents

Advertisement

OPERATION

CAUTION
This water cooler is intended for water cooler only, Do NOT use other liquids. Do NOT
use for other purposes. Warranty is void if used for any other liquids including coffee,
tea, juices, beer or wine.
This water cooler has been designed to sandard water bottles with a 3, 5 or 5.2 gallon
capacity. Do NOT use alternative bottles.
Initial Set Up
Do NOT plug in until steps 1-3 are completed.
1. Allow unit to sit upright for 4 hours.
2. This model uses an pump to force water from the bottle to the reservoirs:
a. Please do the following:
• Open door and place fresh bottle in front of tray.
• Clean bottle cap and neck.
• Remove entire plastic cap from bottle.
• Push down on probe head until it is seated.
Insert power plug into wall outlet.
b. At initial start-up it will take about 3 minutes for the reservoirs to load.
c.
If the lights continue to flash, your bottle may be empty or there may be an
issue with water tube lines.Call 888-828-1426 for assistance.
7

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents