ABB AW400 Series Instruction Manual page 21

In case not all the connections are required, the most important rules to follow are:
•
never run cable for power supply with other cables
•
never run analog I/O cables with other cables
•
never run CCO cables or wires with other cables
Pleases notice that cable gland for power supply cable includes the cable protector: this avoids dangerous
cable abrasion and bending at the point of its inlet in the transmitter.
ANO1
ANO2
ANO3
Power Supply
Fig. 8 – Recommended use of cable glands
ANI1
ANI 1,2
–
CCO1 7
ANI2 ANI3
–
CCI1 2 Serial communication
19