Table of Contents
Advertisement
Chapter 4
Software Management
If the 2370 is in a Model 1040 enclosure or is in a UCS 1000 chassis within a system that includes a
DMM and a CIM, you can manage the 2340 through VT100 Terminal Emulation, which is accessible
by a Telnet session, HyperTerminal or similar terminal emulation software, a standard SNMP
network manager, and CanogaView.
4.1
VT100 Terminal Emulation
Connect the VT100 terminal emulation session to the DMM used in the UCS 1000 chassis or directly
to a Model 1040 enclosure.
For details on the DMM, see the Model 1500 Domain Management Module User Manual.
Setting up the VT100 session depends on which connection, serial port or Ethernet, you have
available for access to the VT100 management program. Canoga Perkins suggests that you use
HyperTerminal for your first session. For details, see the User Manual for your DMM.
Note:
You must set up TCP/IP for the DMM before you can use Telnet; for details, see the manual
for the DMM.
4.2
PC Configuration for Terminal Operation
These steps briefly describe how to set up your PC for a terminal connection to a Model 1040
enclosure. For details on using Windows, see your Windows documentation.
1. Turn on your PC.
2. When the Windows desktop appears, click Start, then highlight Programs, Accessories, the
HyperTerminal Folder, and then click HyperTerminal.
3. At the Connection Description dialog, select an icon, enter a name for the connection to the
system, and click OK.
4. At the Connect To dialog, pull down the Connect using menu, select the COM port, and
click OK.
5. At the COM Properties dialog, on the Port Settings tab, check for these selections:
•
Bits per second: 19200 bps
•
Data bits: 8
•
Parity: None
•
Stop bits: 1
•
Flow control: None
6. Click OK. HyperTerminal connects to the system and the VT100 terminal emulation starts.
EdgeAccess® Universal Chassis System
Model 2370 Model User Manual
4-1
Hide quick links:
Advertisement
Table of Contents
