To Disarm The System; Illuminated Entry - Jeep Liberty 2011 Owner's Manual

cancel the arming process. If the Vehicle Security Alarm
arms successfully, the Vehicle Security Light will flash at
a slower rate to indicate the alarm is set.
NOTE: For added security, whenever the Security
Alarm is armed, the HomeLink /Garage Door Opener
(if equipped) is disabled as well.

To Disarm The System

Either press the UNLOCK button on the RKE transmitter
or insert a valid Sentry Key
cylinder and turn the key to the ON/RUN position.
NOTE:
• Unlocking the doors with the manual door lock plung-
ers or the driver's door lock cylinder will not disarm
the Vehicle Security Alarm.
• When the Vehicle Security Alarm is armed, the interior
power door lock switches will not unlock the doors.
into the ignition lock
THINGS TO KNOW BEFORE STARTING YOUR VEHICLE 19
The Vehicle Security Alarm is designed to protect your
vehicle; however, you can create conditions where the
Vehicle Security Alarm will give you a false alarm. If the
previously described arming sequence has occurred, the
Vehicle Security Alarm will arm regardless of whether
you are inside or outside the vehicle. If you remain inside
the vehicle and open a door, the alarm will sound. If this
occurs, disarm the Vehicle Security Alarm.
Tamper Alert
If something has triggered the Vehicle Security Alarm in
your absence, the horn will sound three times when you
unlock the doors. Check the vehicle for tampering.

ILLUMINATED ENTRY

The interior lights will turn on when you use the Remote
Keyless Entry (RKE) transmitter to unlock the vehicle or
open a door.
2