Electronic Stability Control (Esc) - Jeep Liberty 2011 Owner's Manual

The "Hill Descent" button is located in the lower switch
bank below the climate control.
Hill Descent Button
Enabling HDC
1. Shift the transfer case into 4WD LOW range. Refer to
"Four-Wheel Drive Operation" in "Starting and Operat-
ing" for further information.
2. Press the "Hill Descent" button. The "Hill Descent
Control Indicator Light" in the instrument cluster will
turn on solid.
NOTE: If the transfer case is not in 4WD LOW range,
the "Hill Descent Control Indicator Light" will flash for
five seconds and HDC will not be enabled.
Disabling HDC
1. Press the "Hill Descent" button or shift the transfer
case out of 4WD LOW range. The "Hill Descent Control
Indicator" light in the instrument cluster will turn off.

Electronic Stability Control (ESC)

This system enhances directional control and stability of
the vehicle under various driving conditions. ESC cor-
rects for oversteering or understeering of the vehicle by
applying the brake of the appropriate wheel to assist in
STARTING AND OPERATING 349
5