Chapter 3 System Interface; Overview; Control Panel Buttons; Uid - Supero A+ SERVER 1022G-NTF User Manual

3-1

Overview

There are several LEDs on the control panel as well as others on the SATA drive
carriers to keep you constantly informed of the overall status of the system as well
as the activity and health of specifi c components. There are also two buttons on
the chassis control panel and an on/off switch on the power supply. This chapter
explains the meanings of all LED indicators and the appropriate response you may
need to take.
3-2

Control Panel Buttons

There are three push-buttons located on the front of the chassis: a reset button, a
UID button and a power on/off button.

UID

Depressing the UID (unit identifi er) button illuminates an LED on both the front and
rear of the chassis for easy system location in large stack confi gurations. The LED
will remain on until the button is pushed a second time. Another UID button on the
rear of the chassis serves the same function.

Reset

Use the reset button to reboot the system.
Chapter 3
System Interface
3-1
Chapter 3: System Interface