Password Protection Of Operating System - Fujitsu AMILO Pro Easy Manual

Security functions
Change supervisor or user password
► Open the BIOS Setup again and there the Security menu.
► When changing the password, proceed exactly as for password assignment.
You can only change the supervisor password when you have logged into the BIOS Setup with the
supervisor password.
Cancelling passwords
To cancel a password (without setting a new password) run the following steps:
► Call BIOS Setup and select the Security menu.
► Mark the Set User Password or Set Supervisor Password field and press the Enter key.
With Enter new Password you will then be asked to enter a password.
► Press the Enter key twice.
► Select the Exit Saving Changes option in the Exit menu.
The notebook is rebooted and the password is cancelled.
With the supervisor password you simultaneously deactivate the user password.

Password protection of operating system

With the supervisor password or the user password, you have assigned in the BIOS Setup
i
(see section "Set the supervisor and user password"), you can also prevent booting of the
operating system.
Activating system protection
► Call BIOS Setup and select the Security menu.
► If you have not assigned BIOS passwords yet, define the supervisor and the user password
now, if desired (see "Set the supervisor and user password" section).
► Mark the Password on Boot field and press the Enter key.
► Select the Every Boot entry and press the Enter key.
If you do not want to make any other settings, you can exit BIOS Setup.
► Select the Exit Saving Changes option in the Exit menu.
The notebook reboots and you are asked to enter your password (the supervisor or user password).
40 A26391-K147-Z120-1-7619