Handling Cd/Dvds - Fujitsu AMILO Pro Easy Manual

Table of Contents

Advertisement

Working with the notebook

Handling CD/DVDs

From this point all different optical data storage media will be referred to as CD/DVDs; the writeable
optical data storage media are called blanks.
Observe the following when handling CD/DVDs:
!
Avoid touching the surface of a CD/DVD. Handle CDs/DVDs only by their edges!
Always store CDs/DVDs in their cases. Thus you avoid dust contamination,
scratches, bending or other damage.
Protect your CDs/DVDs from dust, mechanical vibration and direct sunlight!
Avoid storing a CD/DVD in areas subject to high temperatures or humidity.
To utilise the optimum writing speed, use CD blanks marked "Multispeed" or "High
i
Speed".
Use only DVD blanks of the type DVD+RW. Other types of DVD blanks are not supported
by your optical drive.
Inserting or removing a CD/DVD
The notebook must be switched on.
Push the insert/eject button.
The drive tray will open.
2
Pull the drive tray all the way out (1).
Place the CD/DVD in the drive tray with the label facing upwards (2).
or
Take out an inserted CD/DVD.
Push in the drive tray until you feel it lock into place.
30
1
A26391-K147-Z120-1-7619

Advertisement

Table of Contents
loading

Table of Contents