Password Protection For Booting Of The Operating System; Password Protection For The Memory Module - Fujitsu CELSIUS H5511 Operating Manual

Password protection for booting of the operating system

With the supervisor password you have set in the BIOS Setup Utility (see
section "Assigning the supervisor and user passwords", Page
also prevent starting of the operating system.
Operating system
Activating system protection
► Start the BIOS Setup Utility and go to the Security menu.
Operatingsystem
► Select the Password on Boot option and press the Enter key.
► Select the desired option (Disabled, First Boot or Every Boot) and press the Enter key
► Select the Save Changes & Exit option under Exit.
The notebook reboots. You will be prompted to enter your password (the supervisor password).
Deactivating system protection
► Start the BIOS Setup Utility and go to the Security menu.
Operatingsystem
► Select the Password on Boot option and press the Enter key.
► Select the Disabled option and press the Enter key.
If you do not want to change any other settings, you can exit BIOS Setup Utility.
► Select the Save Changes & Exit option under Exit.
The notebook will reboot. The system is no longer password-protected.

Password protection for the memory module

If a supervisor password has been assigned, a password for the memory module
can also be set in the Hard Disk Security menu.
The memory module is protected by this password. Data from this memory module can only
be read into another system if the correct password has been entered.
Fujitsu
Security functions
48), you can
49