Connecting The Power Adapter; Switching On The Notebook For The First Time - Fujitsu AMILO Pro Easy Manual

Table of Contents

Advertisement

Preparing the notebook for use

Connecting the power adapter

Please take note of the information in the section "Selecting a location".
!
The power cable supplied conforms to the requirements of the country in which you
purchased your notebook. Make sure that the power cable is approved for use in the
country in which you intend to use it.
The power adapter's AC cord should only be connected to a mains outlet if the notebook
is connected to the power adapter. (electric shock!)
Upon delivery, the battery can be found in the battery compartment.
Do not use the power adapter for other notebooks or devices.
Do not use a power adapter that is not specially intended for this notebook.
The meaning of the various displays can be found in the section "Status indicators" in the
i
"Working with the notebook" chapter.

Switching on the notebook for the first time

When you switch on your notebook for the first time, the supplied software is installed and
!
configured. Due to the fact that this installation must not be interrupted, you should set
aside enough time for it to be fully completed and connect the notebook to the mains
outlet using the power adapter.
During installation, the notebook may only be rebooted when you are requested to do so!
Switch the notebook on.
During installation, follow the instructions on screen.
Consult the operating system manual if there is anything unclear about the requested input data.
10
1
Connect the power adapter cable to the DC
jack (DC IN) of the notebook (1).
Connect the power cable into the power
adapter.
Plug the power cable into the mains supply.
The battery will charge. The battery indicator
flashes green.
A26391-K147-Z120-1-7619

Advertisement

Table of Contents
loading

Table of Contents