Fujitsu AMILO Pro Easy Manual page 65

Table of Contents

Advertisement

Extended memory failed at offset: xxxx Failing Bits: zzzz zzzz
When testing the extended memory an error has resulted at the address xxxx.
Check whether the additional memory module has been inserted correctly.
If the error message appears repeatedly, please contact the place of purchase or our
hotline/help desk.
Failure Fixed Disk n
The settings of the hard disk drive are incorrect.
Start the BIOS Setup (IDE Adapter 0 Master submenu) and select the correct settings.
Keyboard controller error
Switch the notebook off with the ON/OFF switch.
Wait 3 - 5 seconds and switch on the notebook again.
If the error message appears repeatedly, please contact the place of purchase or our
hotline/help desk.
Keyboard error
If you use an external keyboard:
Check the connection and reboot the notebook.
If the error message appears repeatedly, please contact the place of purchase or our
hotline/help desk.
nn Stuck key
Make sure that no key is pressed.
If the error message appears repeatedly, please contact the place of purchase or our
hotline/help desk.
Operating system not found
Check in the BIOS Setup whether your hard disk has been set correctly.
Make sure that the operating system is installed on the corresponding drive.
Press <F1> to resume, <F2> to SETUP.
This error message appears if an error occurs during the self-test before starting the operating
system.
Press the F1 function key to start the operating system.
Enter the BIOS Setup programme by pressing F2 .
Previous boot incomplete - Default configuration used
Due to an error during the previous system boot, default values were used for certain settings.
Check the BIOS Setup and the settings.
Press the F1 function key when prompted to do so.
Real Time clock error
Contact your sales outlet or our hotline/help desk.
A26391-K147-Z120-1-7619
Troubleshooting and tips
55

Advertisement

Table of Contents
loading

Table of Contents