Installing A Usb Front Panel - Fujitsu Siemens Computers PRIMERGY ECONEL 10 Operating Manual

System expansions

Installing a USB front panel

2
Ê
Remove the system board carrier as described in
Ê
Remove the cover of the bay by pressing against it from the inside.
Ê
Position the USB front panel in the bay (1) and secure the USB front panel with the screws (2).
Ê
Connect the cable provided to the USB front panel and to the system board.
44
1
Installing and removing drives
"Replacing processor".
A26361-K831-Z100-1-7619