System upgrades
Installing and removing a board
Please take note of the section "Information about boards".
!
The number, position and arrangement of the board slots on the mainboard can be found in the
manual for the mainboard. Boards may already be installed on shipment.
Installing a board
►
Open the casing (see "Opening the casing").
►
Remove the fan (see "Removing the side fan").
►
Remove the cross-piece if it is in the way (see "Removing the cross-piece").
1
2
1
3
►
Press on the clips (1) in the direction of the arrow and unhook them from the casing rear panel.
►
Fold open the locking rail in the direction of the arrow (2).
►
Remove the slot cover from the slot (3).
Do not dispose of the slot cover. For cooling, protection against fire and in order to comply
!
with EMC regulations, you must refit the slot cover if you remove the board.
►
Take the new board out of its packaging.
►
Make the required settings for the board.
54
A26361-K990-Z120-1-7619, Edition 6