Changing The Floppy Disk Drive - Fujitsu SCENIC S Operating Manual

Changing the floppy disk drive

Ê
Open the casing (see "Opening the casing").
Ê
Remove the data and power supply connectors from the floppy disk drive.
Ê
Remove the drive cage (see "Removing an accessible drive").
2
Ê
Remove the screws (2) and take the drive out of the carrier (2).
Ê
Take the new floppy disk drive out of its packaging.
Ê
Push the drive into the carrier (3), and fix it with the screws (4).
Ê
Install the drive cage (see "Removing an accessible drive").
Ê
Fit the data and power supply connectors to the floppy disk drive.
Ê
Close the casing (see "Closing the casing").
i
You may have to check the entry for the drive in the BIOS Setup.
A26361-K523-Z100-6-7619
System expansions
4
1
51