Fujitsu SCENIC S Operating Manual page 47

Ê
Push the cover plate into the slot (1). Ensure that the end of the cover engages into the guide
(a).
Ê
Replace the clip (3), which fixes the board. Make sure that the clip engages when released (2).
Ê
Close the casing (see "Closing the casing").
If you have installed or removed a PCI board, check the relevant PCI slot settings in the
i
BIOS-Setup and change where necessary. Further information is provided in the PCI board
documentation.
A26361-K523-Z100-6-7619
a 1
3
System expansions
1
2
39