Switching On The Pc For The First Time - Fujitsu SCENIC S Operating Manual

Preparation for use and operation

Switching on the PC for the first time

If the PC is connected to a network, the network protocol is required as well as the user
i
and server details. Contact your network administrator if you have any questions about
these settings.
When you switch your PC on for the first time the supplied software is set up and configured.
If you require the licence number of Windows, you will find it either on a sticker on your PC or
printed on the front cover of the Windows manual provided.
Ê
Switch your monitor on.
Ê
Switch the PC on with the power switch on the back panel.
Ê
Switch the PC on with the ON/OFF switch.
Ê
If the power-on indicator is illuminated orange or flashes green/orange, press the ON/OFF
switch on the front panel.
The power-on indicator turns green and the PC will start.
Ê
Adjust the brightness if necessary (see the monitor Operating Manual).
Ê
During installation follow the instructions on screen.
Some variants require you to start the software installation by pressing the function key [F1].
Once the installation has been started the PC must not be switched off until the
i
installation is complete.
You should only reboot the PC during installation if you are requested to do so. Otherwise
the installation will be not be performed correctly. If a fault occurs in the installation the
contents of the hard disk must be completely restored.
Consult the operating system manual if there is anything unclear about the requested input data.
Further information about the system, drivers, utilities, updates, manuals etc., is contained
i
on the "Drivers & Utilities" CD.
16
Switching the PC on and off
A26361-K523-Z100-6-7619