Using Memory Security; Setting Up The Memory Security For The First Time - Brother FAX-8250P Owner's Manual

36
C H A P T E R F O U R

Using Memory Security

You must use a password to switch Memory Security ON and OFF.

Setting Up the Memory Security for the First Time

1
Press Menu, 0, 1, or for the FAX-8650P, press Security.
The screen prompts you to enter the password, and then press Set.
NEW PASSWD:XXXX
ENTER & SET
2
Enter a 4-digit number as a new password.
3
Press Set.
The screen prompts you re-enter the password.
VERIFY:XXXX
ENTER & SET
4
Re-enter the password and press Set.
5
The screen displays
SET SECURITY
SET PASSWORD
6
Press or to choose SET SECURITY.
Press Set. The screen prompts you to enter the password.
7
PASSWORD:XXXX
ENTER & SET
8 Enter a 4-digit password, followed by Set.
This is the same as the security code of your machine already stored.
The screen displays ACCEPTED for 2 seconds, followed by SECURE
MODE - Memory Security is now switched ON.
If the password you enter at Step 8 is incorrect, the screen would display
WRONG PASSWORD. After 2 seconds the display will then return to
normal (displaying the date & time). You must then start from Step 1 to
set Memory Security.