Table of Contents
Advertisement
2
C H A P T E R O N E
About Fax Machines
Symbols Used in This Manual
Note or additional information.
The machine may be damaged or may not work
correctly if this is not observed.
Warning. Damage can result if this is not observed.
If you're a first-time fax machine user, fax operation might seem a little
mysterious. You'll soon get used to the unusual fax tones on your phone
line, and be able to send and receive faxes easily.
Fax Tones and Handshake
When someone is sending a fax, the fax machine sends fax calling tones,
(CNG tones)—soft, intermittent beeps at 4-second intervals. You'll hear
them when you dial and press Start, and they continue for about 40
seconds after dialling. During that time, the sending machine must begin
the "handshake" with the receiving machine. Each time you use
automatic procedures to send a fax, you are sending CNG tones over the
phone line. You'll soon learn to listen for these soft beeps each time you
answer a phone on your fax line, so you can know if you are receiving a
fax message.
The receiving fax responds with fax receiving tones—loud, chirping
sounds. A receiving fax chirps for about 40 seconds over the phone line,
and the screen displays RECEIVING. If your fax machine is set to the
Fax Only Mode, it will answer every call automatically with fax
receiving tones. Even if the other party hangs up, your fax machine
continues to send the "chirps" for about 40 seconds, and the screen
continues to display RECEIVING. To cancel the receiving mode, press
Stop.
Advertisement
Table of Contents
