Packet Data Settings - Nokia 5800 XpressMusic User Manual

Connectivity
With the access point name control service, you can restrict
packet data connections and allow your device to use only
certain packet data access points.
This setting is only available if your SIM card supports the
access point control service.
To turn the control service on or off, or to change the allowed
access points, select Options
To change the options, you need your PIN2 code. Contact your
service provider for the code.

Packet data settings

Select Menu Settings
>
settings Packet data.
>
The packet data settings affect all access points using a
packet data connection.
Select from the following:
Packet data connection
●
available and you are in a network that supports packet
data, the device registers to the packet data network.
Starting an active packet data connection (for example, to
send and receive e-mail) is quicker than if the device
establishes a packet data connection when needed. If
there is no packet data coverage, the device periodically
tries to establish a packet data connection. If you select
When needed, the device uses a packet data connection
only if you start an application or action that needs it.
Access point — The access point name is needed to use
●
your device as a packet data modem to a compatible
computer.
82
and the corresponding option.
and Connectivity Admin.
>
— If you select When
High speed packet access
●
of HSDPA (network service) in UMTS networks.
— Enable or disable the use
© 2009 Nokia. All rights reserved.