Wireless Lan - Nokia 5800 XpressMusic User Manual

Connectivity

Wireless LAN

Your device can detect and connect to wireless local area
networks (WLAN). Using a WLAN, you can connect your device
to the internet and compatible devices that have WLAN
support.
About WLAN
Your device can detect and connect to WLANs. Using a WLAN,
you can connect your device to the internet and compatible
devices that support WLAN.
To use a WLAN connection, you need the following:
● WLAN must be available in your location.
● Your device must be connected to the WLAN. Some WLANs
are protected, and you need an access key from the service
provider to connect to them.
● An internet access point created for WLAN. Use the access
point for applications that need to connect to the internet.
A WLAN connection is established when you create a data
connection using a WLAN internet access point. The active
WLAN connection ends when you end the data connection.
You can use WLAN during a voice call or when packet data is
active. You can only be connected to one WLAN access point
device at a time, but several applications can use the same
access point.
Features that use WLAN, or that are allowed to run in the
background while using other features, increase the demand
on battery power and reduce the battery life.
Your device supports the following WLAN features:
72
● IEEE 802.11b/g standard
● Operation at 2.4 GHz
● Wired equivalent privacy (WEP), Wi-Fi protected access
(WPA/WPA2), and 802.1x authentication methods. These
functions can be used only if they are supported by the
network.
Important: Always enable one of the available
encryption methods to increase the security of your wireless
LAN connection. Using encryption reduces the risk of
unauthorised access to your data.
When the device is in the offline profile, you can still use
WLAN, if available. Remember to comply with any applicable
safety requirements when establishing and using a WLAN
connection.
Tip: To check the unique media access control (MAC)
address that identifies your device, open the dialler
and enter *#62209526#.
WLAN connections
To use a wireless LAN (WLAN) connection, you must create an
internet access point (IAP) for WLAN. Use the access point for
applications that need to connect to the internet.
A WLAN connection is established when you create a data
connection using a WLAN internet access point. The active
WLAN connection ends when you end the data connection.
You can use WLAN during a voice call or when packet data is
active. You can only be connected to one WLAN access point
© 2009 Nokia. All rights reserved.